1. Industrial grade high-speed ISP mass production programmer, the best choice for ISP system integration.
2. Support ISP simultaneous programming of up to 16 serial chips. Support almost all serial protocol interface chips. Protocols include (but are not limited to) SPI, I2C, JTAG, BDM, UART, MON, SCI, SWD, SBW, C2D, ICC, SWIM, SDQ, DBG, ICE, CSI.
3. Support simultaneous programming of up to 4 parallel chips such as NAND, NOR, eMMC, etc.
4. Support ISP sequence programming of multiple chips of different models and different types on one circuit board.
5. The programming speed is optional to adapt to the target board load and ISP cable length changes.
6. Three working modes:
1) Online mode: communicate with local PC through USB2.0 port (high speed) to realize online control;
2) Offline mode: With its own keyboard, LCD display, removable memory (standard SD card), it can be run independently offline, easy to operate, easy to expand, and most suitable for mass production on site. The project file (the quantity is only limited by the card capacity) is created online and downloaded to the SD card;
3) Network mode: access to local area network for local or remote control.
7. Cooperate with the precision timing generator that meets the original specifications to ensure that the devices with Vcc of 1.2V to 5V are directly supported, and have higher speed and higher yield.
8. Chip security guarantee mechanism. Built-in precision voltage self-calibration circuit to ensure that the voltage is within the preset accuracy at any time; the self-diagnosis function can diagnose hardware faults at any time to ensure that the machine is in good condition;
9. Perfect over-voltage, over-current and ESD protection functions to avoid damage to the programmer.
10. The powerful software function simplifies operation, improves efficiency, avoids mistakes, and cares for users.
1) Project: Save the user's various operations and settings about the target device, including device model setting, programming file transfer, configuration bit setting, batch processing commands, etc., in the project file, every time One step into the writing operation during operation, effectively reducing the probability of misoperation.
2) The user interface for mass production is intuitively displayed with PCBA pictures, which is concise and clear.
3) Batch (Auto) command. Allows users to organize frequently used command sequences such as erasing, blank checking, programming, verification, and encryption into a single command that can be completed in one step at will.
4) Mass production mode. There is an external start signal input detection line, once the fixture is detected to be closed, the operation will be started immediately. As an offline programmer, once the chip is correctly inserted into the socket CPU, it will automatically start batch processing commands, without manual keystrokes. Up to 12 machines can be controlled through USBHUB, and an unlimited number of machines can be controlled by LAN to work at the same time.
5) Dynamic buffer. The data programmed by each chip can be different, and the software automatically completes data changes according to user requirements, including standard and customized serial number generators (such as MAC addresses, etc.).
6) Log file, production statistics function. Provide convenience for quality tracking. It supports almost various known file formats and has automatic file format identification.
7) Barcode management function. By scanning the barcode on the work order, a series of tasks such as project file loading can be completed to avoid human operation errors.
8) The project settings, task switching, and software upgrades of all programmers are all completed instantly through one server; quality monitoring and statistics are all completed in real time; manual errors such as empty burning are documented; burning files are only stored in the local or remote server The data is safe and secure.
9) Support WINDOWS XP/Vista/Win7/Win8/Win10 32/64bit operating system.